問合せをするモデルを選択してください。

A-30M

CCD Scan

Q：Do I need a special cable in order to use OPOS?

  • No special cable is necessary to use OPOS.

Q：How do I send trigger commands to turn the LED illumination on or off using apps?

  • To send trigger commands via apps, the Z-5130 needs to be connected to a RS-232 or USB-Virtual COM interface.

Q：Can I use A-30M with OPOS?
  • Due to memory restrictions, currently the standard version of A-30M does not support USB OPOS.
Q：Can I use the reserved memory in A-30M?

  • Currently, memories after C8h can be used.

Q：The first scan is always slow due to laser blinking from the sleep mode. How do I set the scanner to be always on?

  • Please refer to the User's Manual and set the scanner to "Blink mode off. Module never enters blink mode."

Q：Can I wake up the scanner by pressing the trigger instead of IR sensing?

  • Please refer to the User's Manual and set the scanner to "Trigger mode."